Mouse interrupt int33h help

[wghh]

i want to write an assembly program that will detect if a mouse is present and the following:
1) number of mouse buttons
2) mouse driver version
3) mouse type and interrupt request number
4) mouse driver is a COM or SYS file

i know the answers
1) int 33h al=0 bx will give me mouse buttons
2)int 33h 24h bx
3) 24 h ch give me mouse type and cl give me interrupt request number
4)25 h if ax=0 that means its SYS if ax=1 its COM

and that is  my code
please help me

===================================
Title detect mouse (Mouse.asm)

.model small
.stack 100h

.data

cr equ 0dh
lf equ 0ah
msg1 db "mouse not installed",cr,lf,lf,"$"
msg2 db "mouse is installed",cr,lf,lf,"$"
msg3 db "mouse detection"cr,lf,lf,"$"
display macro string
         mov ah,9
         mov dx,offset string
         int 21h
         endm

.code

main proc

mov ax,@data
mov ds,ax



           mov ah,02
           mov dx,0808h
           mov bh,00
           int 10h

display msg1

   mov ah,35h
   mov al,33h
   int 20

   mov ax,es
   cmp ax,bx
   jz  no
   jmp ins

no:
display msg2

   mov ah,4ch
   int 21h
ins:

display msg3

   mov ah,4ch
   int 21h
main endp
end main
========================

[FORTRANS]

Hi,

Code Select Expand


   mov ah,35h
   mov al,33h
   int 20


   That looks like a typo. It probably should be Int 21H.

Steve

[dedndave]

definately - INT 20 is INT 14h - rarely used for serial i/o
i would use...

        mov     ax,3533h
        int     21h

[MichaelW]

number of mouse buttons

Interrupt 33h, Function 0: Mouse Reset and Status
Call with:
AX = 0
Returns:
AX = -1 if mouse found and reset, otherwise 0
BX = number of buttons

mouse driver version
mouse type and interrupt request number

Interrupt 33h, Function 36: Get Driver Version, Mouse Type, and IRQ Number
Call with:
AX = 36
Returns:
BX = mouse driver version number, major version in BH, minor version in BL
CH = mouse type
1 = bus mouse
2 = serial mouse
3 = inport mouse
4 = PS/2 mouse
5 = Hewlett-Packard mouse
probably others defined for later drivers
CL = IRQ number
0 = PS/2, otherwise IRQ

mouse driver is a COM or SYS file

Interrupt 33h, Function 37: Get General Driver Information
Call with:
AX = 37
Returns:
AX = general information
bit 15 represents driver type, 0 = COM file, 1 = SYS file
other bits represent other information
BX, CX, DX = other information

[wghh]

Hi,

Code Select Expand


   mov ah,35h
   mov al,33h
   int 20


   That looks like a typo. It probably should be Int 21H.

Steve

definately - INT 20 is INT 14h - rarely used for serial i/o
i would use...

        mov     ax,3533h
        int     21h

thanks but how can i check
1) number of mouse buttons
2) mouse driver version
3) mouse type and interrupt request number
4) mouse driver is a COM or SYS file

without the debugger

==================
-a
17AB:0100 mov al,0
17AB:0102 int 33
17AB:0104 int 3
17AB:0105
-g=100

AX=FFFF  BX=0002  CX=0000  DX=0000  SP=FFEE  BP=0000  SI=0000  DI=0000
DS=17AB  ES=17AB  SS=17AB  CS=17AB  IP=0104   NV UP EI PL NZ NA PO NC
17AB:0104 CC            INT     3
-
to reset mouse service routine
=====================================================================

-a
17AB:0100 mov al,1b
17AB:0102 int 33
17AB:0104 int 3
17AB:0105
-g=100

AX=001B  BX=0032  CX=0032  DX=0032  SP=FFEE  BP=0000  SI=0000  DI=0000
DS=17AB  ES=17AB  SS=17AB  CS=17AB  IP=0104   NV UP EI PL NZ NA PO NC
17AB:0104 CC            INT     3
-
To get mouse sensitvity
=====================================================================

-a
17AB:0100 mov al,1a
17AB:0102 mov bx,15
17AB:0105 mov cx,20
17AB:0108 mov dx,25
17AB:010B int 33
17AB:010D int 3
17AB:010E
-g=100

AX=001A  BX=0015  CX=0020  DX=0025  SP=FFEE  BP=0000  SI=0000  DI=0000
DS=17AB  ES=17AB  SS=17AB  CS=17AB  IP=010D   NV UP EI PL NZ NA PO NC
17AB:010D CC            INT     3
-
to set mouse sensitvity
=====================================================================

-a
17AB:0100 mov al,24
17AB:0102 int 33
17AB:0104 int 3
17AB:0105
-g=100

AX=0024  BX=0800  CX=0302  DX=0000  SP=FFEE  BP=0000  SI=0000  DI=0000
DS=17AB  ES=17AB  SS=17AB  CS=17AB  IP=0104   NV UP EI PL NZ NA PO NC
17AB:0104 CC            INT     3
-
to get mouse driver
=====================================================================

-a
17AB:0100 mov al,25
17AB:0102 int 33
17AB:0104 int 3
17AB:0105
-g=100

AX=0100  BX=0000  CX=0000  DX=0000  SP=FFEE  BP=0000  SI=0000  DI=0000
DS=17AB  ES=17AB  SS=17AB  CS=17AB  IP=0104   NV UP EI PL NZ NA PO NC
17AB:0104 CC            INT     3
-
to get mouse information
=====================================================================

-a
17AB:0100 mov ah,35
17AB:0102 mov al,33
17AB:0104 int 21
17AB:0106 int 3
17AB:0107
-g=100

AX=3533  BX=23C4  CX=0000  DX=0000  SP=FFEE  BP=0000  SI=0000  DI=0000
DS=17AB  ES=032E  SS=17AB  CS=17AB  IP=0106   NV UP EI PL NZ NA PO NC
17AB:0106 CC            INT     3
-

=====================================================================

[dedndave]

i guess i don't understand the problem
you seem to have the functions you need
you even seem to be able to make them work for you under debug
so - what's the trouble ?

here is a link to an INT 33h reference...
http://www.siddhant.name/text/int33.html

EDIT - i see something that may be causing you trouble
the function number needs to be in AX - not AL
AH needs to be 0
INT 33h is a little strange that way
another thing that may be causing problems for you is "focus"
your program needs to be on top and have windows focus in order for it to return proper info or for you to control the cursor
for example, if you move the mouse to a position outside your window, Windows takes control of the mouse